Load Sensor/SMA35GDDC-C2 Load Sensor
Product Categories Load Cells
The wired load sensor is a load sensor with high anti-interference performance. The product adopts standard current 4-20mA signal output and fully sealed design. It can work in harsh environments such as high temperature, high cold, high humidity, and high radiation. It is currently widely used in the pumping unit power diagram measurement system.
1. Overview
The wired load sensor is a load sensor with high anti-interference performance. The product adopts standard current 4-20mA signal output and fully sealed design. It can work in harsh environments such as high temperature, high cold, high humidity, and high radiation. It is currently widely used in the pumping unit power diagram measurement system.
2. Features
1. Continuously improved after field use;
2. Fully sealed and waterproof design to meet all-weather use;
3. Optimize the wiring terminals to improve reliability;
4. Convenient and safe to operate;
5. Standard 4~20mA two-wire output;
6. The power supply does not distinguish between positive and negative poles;
Dimensions(In mm. 1mm=0.03937 inches)
Circuit Diagram
Two-wire output: power supply does not distinguish between positive and negative poles
Specifications
| Project Type | Technical parameters |
| Measuring range Nominal load range | 0～150 KN |
| Output output | 4-20mA |
| Comprehensive accuracy Class precision | 0.5%FS |
| Insulation Resistance | ≥5000MΩ |
| Zero Balance | ≤0.1%FS |
| Operating voltage Power supply | 15~24 VDC |
| Temperature drift Effect of temperature | 0.5%FS/10℃ |
| Temperature compensation temperature compensation | -10~65℃ |
| Operating temperature Operating temperature | -40～+85℃ |
| Safety overload Safe Load Limit | 150% FS |
| Plastic deformation limit Safety margin against yielding | 300% FS |
| Material Material | High performance alloy steel or (chromium ratio greater than 15% stainless steel) High performance alloy steel or (chromium ratio>15% stainless steel) |
| Protection level Protection type | IP68 (IEC60529) |
