Micro Sensors / SM32D Micro Sensors
Product Categories Micro Sensors
This sensor is made of alloy steel or stainless steel, with a low profile diaphragm box structure. It is produced using raw materials from the United States and proprietary processing technology from BEAN. It is laser sealed and welded, and is pressure-bearing. It is mainly used in key feel testers, pressure detection of cold and hot presses, robot grippers, and other force detection fields with small installation space and various measuring equipment.
Description
This sensor is made of alloy steel or stainless steel, with a low profile diaphragm box structure. It is produced using raw materials from the United States and proprietary processing technology from BEAN. It is laser sealed and welded, and is pressure-bearing. It is mainly used in key feel testers, pressure detection of cold and hot presses, robot grippers, and other force detection fields with small installation space and various measuring equipment.
Features:Strong anti-eccentric load capability, good impact resistance, waterproof and oil-proof, corrosion-resistant, compact and easy to install
Dimensions (In mm. 1mm=0.03937 inches)
Circuit Diagram
Specification Technical parameters:
| Project Type | Technical parameters |
| Measuring range Nominal load range | 1~3 t |
| Operating voltage Power supply | 10~12 VDC |
| Zero balance | 1.0±% of rated output |
| Analog Output Analog output | 2.0±0.015mV/V |
| Input resistance (Rlc) | 380±5Ω (ohms) |
| Output resistance (Ro) | 350±2Ω (ohms) |
| Insulation resistance | ≥5000 MΩ（Mege-Ohms） |
| Comprehensive accuracy Class precision | 0.05%FS |
| Temperature drift Effect of temperature | 0.05%FS/10℃ |
| Operating temperature Operating temperature | -40～+85℃ |
| Safety overload Safe Load Limit | 200% FS |
| Plastic deformation limit Safety margin against yielding | 300% FS |
| Body fracture limit Safety margin against breakage | 500% FS |
| Material Material | High performance alloy steel or (chromium ratio greater than 15% stainless steel) High performance alloy steel or (chromium ratio>15% stainless steel) |
| Protection level Protection type | IP66 |
