Micro Sensors / SM32C Micro Sensors
Product Categories Micro Sensors
This sensor is made of alloy steel or stainless steel, columnar structure. It is produced with raw materials from the United States and proprietary processing technology from BEAN Company of the United States. It is sealed with silicone rubber and bears load in compression. It is mainly used in tension and pressure electronic force measurement systems.
Description
This sensor is made of alloy steel or stainless steel, columnar structure. It is produced with raw materials from the United States and proprietary processing technology from BEAN Company of the United States. It is sealed with silicone rubber and bears load in compression. It is mainly used in tension and pressure electronic force measurement systems.
Features:Strong anti-eccentric load capability, high precision, waterproof and oil-proof, corrosion-resistant, compact and easy to install
Dimensions (In mm. 1mm=0.03937 inches)
Circuit Diagram
Specification Technical parameters:
| Project Type | Technical parameters |
| Measuring range Nominal load range | 1~5 t |
| Operating voltage Power supply | 10~12 VDC |
| Zero balance | 1.0±% of rated output |
| Analog Output Analog output | 2.0±0.015mV/V |
| Input resistance (Rlc) | 380±5Ω (ohms) |
| Output resistance (Ro) | 350±2Ω (ohms) |
| Insulation resistance | ≥5000 MΩ（Mege-Ohms） |
| Comprehensive accuracy Class precision | 0.05%FS |
| Temperature drift Effect of temperature | 0.05%FS/10℃ |
| Operating temperature Operating temperature | -40～+85℃ |
| Safety overload Safe Load Limit | 200% FS |
| Plastic deformation limit Safety margin against yielding | 300% FS |
| Body fracture limit Safety margin against breakage | 500% FS |
| Material Material | High performance alloy steel or (chromium ratio greater than 15% stainless steel) High performance alloy steel or (chromium ratio>15% stainless steel) |
| Protection level Protection type | IP66 |
