Other sensors/SM10C load cell
Product Categories Other Sensors
This sensor is made of alloy steel or stainless steel, with a circular gasket structure and a flat pressure load. It is produced using American raw materials and proprietary processing technology from BEAN, an American company. It is mainly suitable for measuring the force of various bolts, shafts or dynamometers, and is also used for tension and pressure testing of screws and rods.
Overview
This sensor is made of alloy steel or stainless steel, with a circular gasket structure and a flat pressure load. It is produced using American raw materials and proprietary processing technology from BEAN, an American company. It is mainly suitable for measuring the force of various bolts, shafts or dynamometers, and is also used for tension and pressure testing of screws and rods.
Features:Good anti-deflection, high precision, low height, small size and easy installation
Dimensions (In mm. 1mm=0.03937 inches)
Circuit Diagram
Specification Technical parameters:
| Project Type | Technical parameters |
| Measuring range Nominal load range | 5～50t |
| Operating voltage Power supply | 10~12 VDC |
| Zero balance | 1.0±% of rated output |
| Analog Output Analog output | 2.0±0.015mV/V |
| Input resistance (Rlc) | 780±20Ω（ohms） |
| Output resistance (Ro) | 700±5Ω（ohms） |
| Insulation resistance | ≥5000 MΩ（Mege-Ohms） |
| Comprehensive accuracy Class precision | 0.1%FS |
| Temperature drift Effect of temperature | 0.1%FS/10℃ |
| Operating temperature Operating temperature | -40～+85℃ |
| Safety overload Safe Load Limit | 200% FS |
| Plastic deformation limit Safety margin against yielding | 300% FS |
| Body fracture limit Safety margin against breakage | 500% FS |
| Material Material | High performance alloy steel or (chromium ratio greater than 15% stainless steel) High performance alloy steel or (chromium ratio>15% stainless steel) |
| Protection level Protection type | IP67 |
