Three-Pulley Sensor / Three-Pulley Sensor SM40G
Product Categories Three pulley sensor
This three-pulley sensor is designed with alloy steel. When installing, just install the power take-off device on the wire rope. This product can be used in tower cranes with no fixed rope head or truck cranes with single-rate working conditions, mine hoisting, bridge rope tension monitoring, cable tension monitoring and other equipment. It is widely used in the crane industry and is particularly suitable for tension detection of wire ropes under dynamic conditions.
Description Overview
This three-pulley sensor is designed with alloy steel. When installing, just install the power take-off device on the wire rope. This product can be used in tower cranes with no fixed rope head or truck cranes with single-rate working conditions, mine hoisting, bridge rope tension monitoring, cable tension monitoring and other equipment. It is widely used in the crane industry and is particularly suitable for tension detection of wire ropes under dynamic conditions.
Features:
It has good mechanical properties. It is small in size and light in weight.
Dimensions(In mm. 1mm=0.03937 inches)
Electrical wiring
Technical Specification
| Parameter parameter | Min | Type | Max | Unit |
| Maximum Capacity Rated range | one | 12000 | one | Kg |
| Excitation voltage | 13.2 | 24 | 36 | V DC |
| Power Dissipation | one | 2.5 (24VDC) | one | W |
| Signal output | Three-wire system 4～20 (mA) | |||
| Combined Error | one | ±0.5 | one | %FS |
| Creep over 30 min | one | ±0.3 | one | %FS |
| Temperature effect | one | ±0.3 | one | %FS/10℃ |
| Service Temperature Range | -30 | 25 | 70 | ℃ |
| Storage Temperature Range Storage Temperature Range | -40 | 25 | 85 | ℃ |
| Safe load limit safe overload | one | 120 | one | %FS |
| Lateral load limit | one | 150 | one | %FS |
| Degree of protection according to EN60529 | IP 67 | |||
| Material：Measuring element | Alloy steel | |||
| Citation Standard | GB12602-2009 | |||